Tungsten Carbide Burr Cutters - Overview
SAN Tungsten Carbide Burr Cutters are manufactured from high grade virgin carbide blanks with silver brazing. Ideal for deburring, shaping, and finishing of metals, castings, and welds. Available in a comprehensive range of shapes for any application.
Cylindrical Burr - Type C (Standard & Cross Cut)
Standard and cross-cut cylindrical burrs for flat surface work, deburring, and general stock removal.
| Model | Head Dia (mm) | Edge Length (mm) | Shank (mm) | OAL (mm) |
|---|---|---|---|---|
| C-1 | 3 | 14 | 3 | 38 |
| C-2 | 6 | 16 | 6 | 50 |
| C-3 | 8 | 19 | 6 | 55 |
| C-4 | 10 | 20 | 6 | 56 |
| C-5 | 12 | 25 | 6 | 61 |
| C-6 | 16 | 25 | 6 | 65 |
Tree Radius End Burr - Type TB
Tree-shaped burrs with radius end for contoured surface work and internal radius blending.
| Model | Head Dia (mm) | Edge Length (mm) | Shank (mm) | OAL (mm) |
|---|---|---|---|---|
| TB-1 | 6 | 15 | 6 | 50 |
| TB-2 | 8 | 20 | 6 | 55 |
| TB-3 | 12 | 25 | 6 | 61 |
Cylindrical End Cut Burr - Type CE
Flat-end cylindrical burrs for bottom finishing and flat surface deburring.
| Model | Head Dia (mm) | Edge Length (mm) | Shank (mm) |
|---|---|---|---|
| CE-1 | 8 | 19 | 6 |
| CE-2 | 10 | 20 | 6 |
| CE-3 | 12 | 20 | 6 |
Conical Burr - Type A
Conical-shaped burrs for angular surface work, countersinking, and chamfering.
| Model | Head Dia (mm) | Edge Length (mm) | Shank (mm) | Angle |
|---|---|---|---|---|
| A-1 | 3 | 10 | 3 | 60° |
| A-2 | 6 | 15 | 6 | 60° |
| A-3 | 8 | 20 | 6 | 60° |
| A-4 | 10 | 22 | 6 | 60° |
| A-5 | 12 | 25 | 6 | 60° |
Ball Burr - Type S
Ball-shaped burrs for concave surfaces, internal radii, and rounded grooves.
| Model | Head Dia (mm) | Shank (mm) | OAL (mm) |
|---|---|---|---|
| S-1 | 6 | 6 | 50 |
| S-2 | 8 | 6 | 55 |
| S-3 | 10 | 6 | 56 |
| S-4 | 12 | 6 | 61 |
Additional Burr Shapes
SAN also offers the following burr shapes for specialized applications. All manufactured from high-grade virgin carbide with silver brazing.
| Type | Shape | Head Dia Range (mm) | Application |
|---|---|---|---|
| B - Cylindrical Ball | Cylinder with ball end | 3 - 16 | Radius blending, filleted slots |
| K - Cone Radius | Cone with rounded tip | 3 - 12 | Curved countersinks, fillets |
| T - Tree Pointed | Tree with pointed end | 3 - 16 | Sharp internal corners, V-grooves |
| F - Flame | Flame / teardrop shape | 6 - 12 | Weld seam work, contoured surfaces |
| R - Rim | Disc / wheel shape | 10 - 16 | Slot deburring, groove cutting |
| O - Oval | Egg / oval shape | 6 - 12 | Curved surfaces, porting |