Expert guides, tips and insights on CNC tooling, insert selection, and machining best practices from the SAN Tools team.
First Article Inspection in UAE Defence Manufacturing: What You Need
First Article Inspection in UAE Defence Manufacturing: What You Need A practical guide for EDGE Group, Strata, and NIMR Tier-2 suppliers — from AS9100D requirements...
Read Article →Amana Tool vs Generic Router Bits: What UAE Fabricators Need to Know
Amana Tool vs Generic Router Bits: What UAE Fabricators Need to Know A real-world comparison for woodworking, aluminium, and composite routing operations — from tool...
Read Article →Setting Up a Machine Shop in UAE: Essential Tooling Checklist
Setting Up a Machine Shop in UAE: Essential Tooling Checklist What you need to stock, specify, and source before you cut your first chip —...
Read Article →What Is ICV and Why It Matters for UAE Manufacturers
What Is ICV and Why It Matters for UAE Manufacturers Understanding the In-Country Value programme — and how to use it to win more government...
Read Article →How to Choose Carbide Inserts for 316 Stainless Steel Machining
How to Choose Carbide Inserts for 316 Stainless Steel Machining A practical guide for UAE manufacturers working with austenitic stainless — from grade selection to...
Read Article →
Loctite 243 vs 2701: Which Threadlocker Do You Need? Complete UAE Buyer's Guide
Loctite 243 vs 2701: Which Threadlocker Do You Need? A complete comparison guide for maintenance engineers, workshop managers, and procurement professionals in the UAE. Loose...
Read Article →Why Your Inserts Are Wearing Out Too Fast — And How to Fix It
Premature insert wear killing your productivity? Discover the 6 root causes — from cutting speed and feed rate to coating choice and machine rigidity —...
Read Article →Beginner's Guide to CNC Tooling: Everything You Need for Your First Setup
New to CNC? This guide covers the essential tooling categories for your first setup: tool holders, turning inserts, end mills, measuring instruments, and workholding —...
Read Article →5 Signs You're Using the Wrong Insert Geometry (And What to Switch To)
Recognize 5 diagnostic signs of wrong insert geometry: flank wear, built-up edge, chipping, poor finish, and stringy chips. Learn what to switch to for each...
Read Article →Turning vs. Milling: Which CNC Operation Do You Actually Need?
Compare CNC turning and milling operations. Learn when to use each, what parts suit each operation, and the tools you need. A practical guide from...
Read Article →How to Choose the Right Carbide Insert for Stainless Steel Machining
Choose the right carbide insert for stainless steel. Learn about PVD TiAlN vs CVD coatings, positive rake geometry, chipbreaker selection, and cutting speed recommendations from...
Read Article →
Carbide Tool Coatings Explained: TiN vs TiAlN vs TiCN vs AlCrN — Which to Use When
TiAlN for stainless and high-speed work. TiN for basic steel. AlCrN for titanium and superalloys. TiCN for medium-speed stainless. That's the decision tree — this...
Read Article →