Volkel Hand Taps DIN 352 HSS-G, Set of 3 - Fine Metric

Genuine VÖLKEL hand tap sets to DIN 352, HSS-G, for cutting internal fine metric threads down to M1. Each set includes taper, plug and bottoming taps for starting, running and finishing very small blind or through holes. Stocked by San Tools in the UAE from M1 to M2.5, ideal for instrument, jewellery and precision small-parts work.

Features

• DIN 352 Standard — hand tap geometry for very fine/small thread work
• Set of 3 Taps — taper (starting), plug (intermediate) and bottoming (finishing) taps in every set
• HSS-G Construction — ground high-speed steel for a sharp, long-lasting cutting edge
• Fine Metric Sizes — M1 x 0.25, M2 x 0.4 and M2.5 x 0.45 for very small precision components
• Straight Flute Design — reliable chip evacuation for small-diameter tapping
• Precision Ground — accurate pitch and profile for delicate, small-scale threading work

How to Use

• Drill the Correct Tap Drill Size — use a precise pilot hole; small taps are easy to break with an oversized or undersized hole
• Use a Sensitive Tap Wrench — a small, low-torque wrench gives better feel and control on these delicate sizes
• Start with the Taper Tap — its gradual chamfer starts the thread straight and true
• Progress to Plug, then Bottoming — use the plug tap to continue, and the bottoming tap to thread close to the bottom of blind holes
• Back Off Frequently — clear chips often and avoid forcing the tap; these small sizes snap easily under excess torque

Specifications

Type: Hand Tap Set (Set of 3: Taper, Plug, Bottoming)
Standard: DIN 352
Thread Form: Metric Fine (small diameters)
Material: HSS-G (Ground High-Speed Steel)
Size Range: M1 x 0.25 – M2.5 x 0.45
Brand: VÖLKEL (Germany)
Origin: Imported, distributed by San Tools UAE