Precision Tooling for Medical Devices & Clean Manufacturing UAE | SAN Tools

Medical Devices & Clean Manufacturing — UAE Supplier

Precision Tooling for UAE Medical Device & Clean Manufacturing

Tight-tolerance machining of titanium implants, surgical instruments, PEEK components and stainless housings — SAN Tools supplies Mitutoyo precision measurement, carbide inserts and Loctite medical-grade adhesives for UAE medical device manufacturers.

Mitutoyo precision instruments Tight-tolerance carbide tooling ICV-eligible supplier UAE-stocked inventory 1-day quote turnaround
Request a Quote Mitutoyo instruments →
ICV-Eligible
Counts toward your ICV score
Tight Tolerances
Tooling for ±0.005mm requirements
UAE-Stocked
No overseas lead times
1-Day Quote
Fast turnaround for production

MIITE 2026 — UAE Medical Devices & Clean Manufacturing Sector

The UAE government has identified medical devices as a priority sector under the Make It In The Emirates (MIITE) initiative. Abu Dhabi’s free zones (ADFZ, twofour54, Masdar City) and Dubai (DHCC, Dubai Science Park) are attracting medical device OEMs and their Tier-2 machining suppliers. These operations demand sub-micron tolerances, biocompatible materials and validated measurement — all areas where SAN Tools’ Mitutoyo instruments and specialist carbide tooling deliver direct value.

Key Applications

Medical Device Machining Applications

Titanium Implant Machining

Milling and turning of Ti-6Al-4V and Grade 23 titanium for bone plates, screws, hip stems and spinal cages. Sharp-edged, uncoated or TiN-coated carbide inserts to minimise work hardening and built-up edge.

Korloy · YG-1 · Iscar

Surgical Instrument Manufacture

Milling and turning of 316L and 17-4PH stainless steel for forceps, retractors, scissors bodies and laparoscopic instrument shafts. Tight surface finish requirements (Ra ≤0.8 μm) for sterilisation compatibility.

Korloy · Iscar · Sandvik

PEEK & Polymer Component Routing

CNC routing and milling of PEEK, UHMWPE and medical-grade nylon for spinal spacers, trial implants and instrument housings. Amana Tool solid carbide bits for burr-free polymer cutting.

Amana Tool

First-Article Inspection (FAI)

Dimensional verification of machined implants and instruments using Mitutoyo digital micrometers, bore gauges and height gauges. ISO 13485 and FDA 21 CFR Part 820 compliance requires validated measurement equipment with calibration records.

Mitutoyo (Japan)

Diagnostic Equipment Housings

Precision milling of aluminium 6061 and 7075 enclosures for diagnostic equipment, imaging systems and lab instruments. Close-tolerance bore and pocket features for optical and electronic component fitment.

YG-1 · Korloy

Cleanroom Assembly Bonding

Medical-compatible Loctite adhesives for component bonding, cannula assembly, strain relief and optical element potting. Loctite 4014 (medical cyanoacrylate, ISO 10993 compliant) and UV-cure structural adhesives for cleanroom bonding.

Loctite (Henkel)
Quality & Compliance Standards

Standards Supported by Our Tooling & Instruments

Mitutoyo instruments and certified calibration support dimensional validation requirements across the most common medical device quality standards.

ISO 13485
Medical device quality management systems
FDA 21 CFR 820
US FDA quality system regulation for medical devices
ISO 10993
Biological evaluation of medical devices
ASTM F136
Ti-6Al-4V ELI for surgical implants
ISO 5832
Metallic materials for surgical implants
ISO 9283
Manipulating robots — performance criteria
Tooling Reference

Medical Device Machining — Tooling Guide

Recommended tooling for the most common medical device materials. Contact us with your specific material grade, tolerance and surface finish requirements.

Operation Material Tooling Type Key Requirements Brand
Implant milling Ti-6Al-4V (Grade 5/23) CCMT / DCMT inserts Sharp edge, low cutting forces, flood coolant Korloy / Iscar
Implant turning Ti-6Al-4V VCMT / CCMT positive inserts Uncoated or TiN, rake angle +10°–+15° Korloy
Stainless milling 316L / 17-4PH End mills — variable helix AlTiN coated, 4-flute, 0.3×D depth of cut YG-1
Stainless turning 316L stainless VCMT / DNMG inserts M10 / M20 grade, PVD coated Korloy
PEEK routing PEEK / UHMWPE Solid carbide spiral bits 2-flute, ZrN coated, Ra ≤1.6 μm Amana Tool
Aluminium — housing Al 6061 / 7075 High-speed end mills 3-flute, O-flute, 24,000 RPM, MQL YG-1 / Amana Tool
Bore gauging All materials Digital bore gauges Mitutoyo 0.001mm resolution, ISO calibration Mitutoyo
OD / ID measurement All materials Digital micrometers + calipers Mitutoyo 0–150mm, ±0.003mm, calibrated Mitutoyo
Surface texture All materials Surface roughness testers Ra / Rz measurement to ISO 4287 Mitutoyo
Component bonding Ti / SS / polymer Cyanoacrylate / UV adhesive Loctite 4014 (ISO 10993), Loctite 3494 (UV) Loctite (Henkel)
Calibration certificates available on request

Mitutoyo instruments supplied by SAN Tools can be accompanied by calibration certificates traceable to national standards. Contact us when ordering if calibration documentation is required for ISO 13485 or FDA quality system compliance.

Common Questions

Medical Device Tooling FAQ

Do you supply carbide inserts for titanium implant machining?
Yes. We stock positive-rake carbide inserts (CCMT, VCMT, DCMT geometries) suitable for Ti-6Al-4V Grade 5 and Grade 23 (ELI). Titanium requires sharp cutting edges, low cutting forces and effective coolant delivery to prevent work hardening and built-up edge. Contact us with your insert designation and workpiece alloy and we will confirm stock availability and recommend the appropriate grade.
Can you supply Mitutoyo instruments with calibration certificates for ISO 13485?
Yes. We stock Mitutoyo digital calipers, outside micrometers, height gauges, bore gauges and dial test indicators. Calibration certificates traceable to national measurement standards are available on request for ISO 13485, FDA 21 CFR Part 820 and AS9100D quality management system requirements. Please specify when ordering that calibration documentation is required.
Do you stock tooling for 316L stainless steel surgical instruments?
Yes. 316L austenitic stainless requires positive-rake inserts with AlTiN or PVD coating to manage work hardening. We stock VCMT and DNMG turning inserts in M10/M20 grades and variable-helix AlTiN end mills for surgical instrument bodies, shaft turning and finishing. Contact us with your operation, depth of cut and surface finish requirement for a specific recommendation.
Which Loctite adhesives are suitable for medical device assembly?
For medical device assembly, we stock Loctite 4014 (medical-grade cyanoacrylate, ISO 10993-5 and ISO 10993-10 compliant), Loctite 3494 (UV-cure structural adhesive for optical and electronic assemblies) and Loctite 648 (high-strength retaining compound for metal-to-metal bonding). Contact us with your substrate materials and application environment and we will recommend the appropriate adhesive system with the required technical data sheet.
Are your products ICV-eligible for UAE medical device manufacturers?
Yes. SAN Tools is a UAE-registered company and all tooling and instrument purchases are ICV-eligible under the In-Country Value programme. Medical device manufacturers in Abu Dhabi free zones (ADFZ, Masdar) and Dubai (DHCC, Dubai Science Park) can include SAN Tools purchases in their ICV calculation. We issue AED invoices from our UAE entity.
Can you supply PEEK and polymer routing tools for implant components?
Yes. We stock Amana Tool solid carbide spiral router bits for PEEK, UHMWPE and medical-grade nylon. These materials require sharp cutting edges and effective chip evacuation to avoid heat buildup and surface degradation. Amana Tool ZrN-coated bits are optimised for medical polymer routing with Ra ≤1.6 μm surface finish. Contact us with your component dimensions and spindle speed for a specific recommendation.

Precision Tooling for UAE Medical Device Manufacturing

Mitutoyo instruments · Carbide inserts for Ti & stainless · Loctite medical adhesives · ICV-eligible · UAE-stocked. Request a quote and receive pricing within 24 hours.

Get a Quote →