YG1 Solid Carbide Endmill (Multi-Flute) UAE

Solid Carbide Endmills - 1, 2, 3 & 4 Flute, Square & Ball Nose

YG1 solid carbide endmills spanning 1-flute ALU-POWER aluminium cutters, 2 & 3-flute general-purpose mills, and 4-flute V7 PLUS square and ball-nose profiles for steel and hardened material machining.

Features

• Full Flute Range - 1, 2, 3 and 4-flute options to match material and finish requirements
• ALU-POWER Series - 1-flute geometry optimised for high-speed aluminium and non-ferrous milling
• V7 PLUS Coating - Advanced coating on 4-flute square and ball-nose endmills for extended tool life in steel
• Ball Nose Profiles - Available in ball-nose form for 3D contouring and die/mould work
• Short & Long Series - Standard and long-reach lengths for varying depth-of-cut requirements
• Solid Carbide Construction - Superior rigidity and heat resistance versus HSS for higher cutting speeds

How to Use

• Match Flute Count to Material - Use 1-2 flute for aluminium/soft metals, 4-flute for steel and harder alloys
• Use Ball Nose for Contours - Select ball-nose profiles for 3D surfacing and die/mould finishing passes
• Run at Carbide-Appropriate Speeds - Carbide tolerates higher RPM than HSS; consult speed/feed charts for the material
• Apply Coolant/Air Blast - Use coolant or air blast to clear chips and manage heat, especially at higher speeds
• Avoid Excessive Overhang - Keep tool stick-out minimal to reduce deflection and chatter

Specifications

Material: Solid Carbide
Flute Options: 1F / 2F / 3F / 4F
Profile: Square End & Ball Nose
Coating: V7 PLUS (4-flute range)
Origin: India