Volkel Tap Sets ISO 529 HSS-G, Set of 3 - UNF

Genuine VÖLKEL hand tap sets to ISO 529, HSS-G, for cutting internal UNF (Unified Fine) threads. Each set includes taper, plug and bottoming taps for starting, running and finishing blind or through holes. Stocked by San Tools in the UAE from 1/4" to 1".

Features

• ISO 529 Standard — standard hand tap geometry compatible with common tap wrenches and holders
• Set of 3 Taps — taper (starting), plug (intermediate) and bottoming (finishing) taps in every set
• HSS-G Construction — ground high-speed steel for a sharp, long-lasting cutting edge
• UNF Thread Form — Unified Fine thread profile for precision imperial fasteners
• Full Size Range — 1/4" x 28 through 1" x 14 covers the majority of common UNF tapping work
• Straight Flute Design — good all-round chip evacuation for through and blind holes in general materials

How to Use

• Drill the Correct Tap Drill Size — use the correct pilot hole diameter for the UNF thread you're cutting
• Start with the Taper Tap — its gradual chamfer starts the thread straight and true
• Progress to Plug, then Bottoming — use the plug tap to continue, and the bottoming tap to thread close to the bottom of blind holes
• Lubricate and Clear Chips — apply cutting oil and back off periodically to break and clear chips
• Keep the Tap Square — check alignment as you start each tap to avoid a crooked or torn thread

Specifications

Type: Hand Tap Set (Set of 3: Taper, Plug, Bottoming)
Standard: ISO 529
Thread Form: UNF (Unified Fine)
Material: HSS-G (Ground High-Speed Steel)
Size Range: 1/4" x 28 – 1" x 14
Brand: VÖLKEL (Germany)
Origin: Imported, distributed by San Tools UAE