RUHI Solid Carbide Long Endmill

Features

• Extra-long reach solid carbide endmills designed for deep pocket, deep slot and rib-milling operations that standard-length endmills cannot access
• Available in 8mm, 10mm and 12mm diameters, each with a 100mm flute length and 200mm overall length
• Solid carbide body maintains rigidity and dimensional accuracy despite the extended reach, reducing deflection compared to HSS long-series cutters
• Suited to mould/die work, deep cavity machining and applications requiring access below the surface of the workpiece

How to Use

Because of the extended length-to-diameter ratio, run these endmills at reduced radial depth of cut and moderate feed rates to control deflection and chatter - climb milling and light finishing passes are recommended for the deepest sections of a pocket. Use coolant to clear chips from the bottom of deep cavities and to control heat over the long flute length.

Specifications

• Material: Solid carbide
• Diameter range: 8mm, 10mm, 12mm
• Flute length: 100mm
• Overall length: 200mm
• Brand: RUHI