ITI HSS Taper Shank Long Drill UAE

Features

• ITI HSS Taper Shank Long Drills are the extra-length version of ITI's taper shank range, built from high-speed steel for deep-hole drilling where a standard-length drill cannot reach full depth in one pass.
• Morse taper shank locates directly in the machine spindle, tailstock or taper-sleeve socket without a chuck, giving a rigid drive that transmits torque cleanly along the full length of the drill.
• Holds a sharp cutting edge through extended cutting cycles and resists softening from heat generated during long, continuous cuts.
• Wide range of diameters (12mm-49mm) and overall lengths (up to 700mm) to suit demanding industrial deep-hole applications.

How to Use

• Select the taper socket matching the drill's shank size and seat it firmly in the tailstock, radial drill, or lathe spindle.
• Because these drills run long and slender, start the hole with a shorter pilot drill where possible, then follow through with the long drill using moderate feed and reduced speed to minimise deflection.
• Retract regularly to clear swarf and flood with cutting fluid to manage heat over the extended flute length.
• Use a drift to safely remove the drill from the spindle after use.

Specifications

• Brand: ITI
• Material: High-Speed Steel (HSS)
• Shank type: Morse Taper, long series
• Diameter range: 12mm - 49mm (38 sizes)
• Flute/overall length: up to 700mm
• Application: Deep-hole drilling on lathes and radial drills
• Stock location: UAE (SAN Tools, Dubai)